Tag Archives: design

Plaster wall is a sheet of plasterboard, fixed to the metal frame. Such partitioning can be done in almost all areas, but it must be taken into account the fact that in places with high humidity, it is necessary to use only water-resistant plasterboard sheets, otherwise very soon they will have to change. During assembly of the partitions between the frame and sheets drywall to be installed glass wool, or any other suitable insulating material. Giposkarton perfectly capable of withstanding all loads imposed on him, and which include all kinds wall cabinets, bookshelves and the like, but if you still need a material that will be able to keep to himself the most difficult pieces of furniture and interior, you will need to apply special way called deaf sheets. Technical characteristics of this material suggests that it is capable of withstanding loads of up to 100-150 kg per square meter.

Erection of drywall partitions in the following way: first to establish a framework for the wall sheets, which consists of a metal rack profiles. To maximize the noise and heat insulation of your room, between the bearing wall and the frame should be pave rubberized or urethane tape. Once the frame is completely fixed, you can begin to mount on him plasterboard, putting between heat and sound insulation. In the rooms, ceiling height which does not exceed 2.7-3 meters, there should be mounting drywall partitions with a special single-metal frame, but the thickness of the walls of the future must be calculated in advance, taking into account the criterion weight, which will impact on this partition.